Configuring the KVM-FT Hypervisor
After installing the KVM-FT hypervisor (Installing Stratus Cloud Availability Services on KVM Compute Nodes), configure the hypervisors by adding each compute node to a KVM-FT pair group.
Caution: Select your KVM-FT pair groups carefully, because you cannot change them later without redeploying your KVM-FT applications.
Note: You must assign the same Availability Level to both hypervisors in an FT pair group; otherwise, applications will fail to deploy. The recommended setting for fault-tolerant operation is Mission Critical.
To set a KVM-FT hypervisor pair group:
- In the main menu of Stratus Cloud Workload Services, click Hypervisors to display the Hypervisors page.
- On the Hypervisors page, locate the first pair of KVM-FT hypervisors, or compute nodes, that you want to configure as a KVM-FT pair group.
- Click the first KVM-FT hypervisor that you want to add to the pair group. In the option buttons, click to display the Edit Hypervisor panel.
-
In the Edit Hypervisor panel, scroll down to Service Level Definitions, and specify the following tags:
- Availability Level: Select Mission Critical.
- Hypervisor Type: Select KVM-FT.
-
FT Pair Group: If this is your first KVM-FT pair group, select Default Pair Group. If you are adding another pair group, select a different pair group name. (You can add pair group names as described below under To add more KVM-FT pair groups.)
Note: The FT Pair Group field displays only when the selected hypervisor type is KVM-FT.
- Hypervisor Instance Storage Type: Select the storage type for the hypervisor.
- Location: Select one or more deployment locations for the hypervisor.
- Complete any other fields as needed, and then click Save.
- Repeat steps 3-5 to add the second KVM-FT hypervisor to the same KVM-FT pair group.
-
Ensure that you have installed the two quorum servers required by the KVM-FT hypervisor, as described in Installing Quorum Servers for Stratus Cloud Availability Services.
Caution: The quorum servers must be installed and running before you deploy your first KVM-FT application.
- Create a test application to verify that your KVM-FT configuration is functioning properly. For an example that summarizes the process of creating an application, from configuring network connections to creating and deploying a service catalog application, see How to Deploy an Application.
- Before deploying any KVM-FT applications for production use, optionally configure your KVM-FT hypervisors and Ethernet switches to increase performance, as described in Improving the Performance of Stratus Cloud Availability Services.
To add more KVM-FT pair groups (if applicable):
- Ensure that you have connected the KVM-FT A-links and installed the KVM-FT software on the compute nodes.
- In the main menu of Stratus Cloud Workload Services, select Service Level Definitions to display the Service Level Definitions page.
- On the Service Level Definitions page, click Add Tag in the upper right corner of the page to display the Create New Tag panel.
- In the Create New Tag panel, complete the following:
- Name: Type a name for the new pair group. This name displays on the Service Level Definitions page.
- Standard Name: Type a standard name for the new tag. This tag name gets propagated through the back end.
- Nest Tag Under: Select FT Pair Group.
- Description: Type descriptive information about the new tag. Information added here displays at the right of the tag name in the listing on the Service Level Definitions page.
- Click Create.
- Repeat steps 1-5 to create additional pair groups, if applicable.
- To add compute nodes to each new pair group, repeat the procedure above To set a KVM-FT hypervisor pair group.